Yaesu FT-920

You Will Receive: 

A Newsky USB RTL SDR Digital Tuner/Receiver.

You'll receive a 48 inch cable with a MCX connector on one end and a Male SMA connector on the other that connects the RTL SDR Receiver to the rig.

You also receive a 15 inch cable that has a TMP plug on one end and a Female Bulkhead SMA connector on the other. This cable connects the First IF to a SMA connector that you mount in a convenient place on the back of your FT-920. See the pictures. This is a simple modification that requires you to drill a 1/4 inch hole to fit the Female SMA connector. You should be comfortable with this kind of modification before you buy this kit. 

If you do not wish to drill a hole you may run the cable through the "BEEP" hole on the bottom of the rig.

3 foot long USB Extension Cable to get the Tuner/Receiver away from the computer (Computers make a lot of noise). 

Complete instructions and links to the correct software and drivers! Also a couple of handy videos to help with software setup. 

In order to use the Rig Control features of this software you will need the correct CAT Control Cable. 
This will allow the Radio and the Software to communicate for frequency changes through the software (Not needed but strongly recommended). 


I will always strive to source the best quality supplies for my Panadapter Kits and occasionally they change. They will always change for the better. These changes may not be reflected in the pictures.

This system comes with a Remote Control and small antenna that is not used in this application. Toss them in the junk box if you like.

There is also a small disc that is not used. DO NOT INSTALL THE SOFTWARE ON THAT DISK! Use the larger disc marked Panadapter.

I only include these items because you paid for them. 


Price plus Shipping

© mypanadapter.com, 2014